Stuck?
Contact us and ask any questions about your installation and we'll help you troubleshoot!
Toyota With Tool Instructions
🔧 Toyota With Tool Instructions
Complete reset procedure using our specialized OBD2 tool for Toyota vehicles.
📋 Before You Begin
Required: Our specialized Toyota OBD2 reset tool
Time Required: Approximately 30 minutes
⚠️ Important Safety Notes
Battery Health: Ensure your vehicle's battery is in good condition and fully charged before starting this procedure.
Do Not Interrupt: Once started, do not disconnect the tool or turn off the ignition until the full 30-minute cycle is complete.
🛠️ OBD2 Tool Instructions
- Ensure battery health/charge is good
- Plug our tool into the OBD2 port and turn the ignition on (position 2). Ensure all Instrument Cluster lights are flashing
- Set a timer for 30 minutes and wait
- At the end of the 30 minutes, turn the key to the off position and unplug the tool from the OBD2 port. The reset is now complete
✅ Reset Complete
Your Toyota module reset is now complete. The vehicle should be ready for normal operation. If you experience any issues, verify all connections were secure during the procedure.